Specifications

Printing Labels (DC-300 only) 99
13. Press the * REPRINT key to accept the Character Size as M5 with no change. This will bring you to the ID
Code programming mode opening screen.
14. To move to the item number for Part Number (the next item we want to change), enter 8 from the
numeric keypad and press the
+ (plus) key (see Table 7-6 for item numbers). Then press the * REPRINT
key to enter the Part Number programming mode.
15. Enter 14 to change the X Position from 0 mm to 14 mm, then press the
* REPRINT key.
16. Enter 19 to change the Y Position from 21 mm to 19 mm, then press the
* REPRINT key.
17. Press the
* REPRINT key to leave the Angle of 0 Degrees unchanged.
18. Press the
* REPRINT key to accept the Title Width as 56 mm with no change.
19. Press the
* REPRINT key to accept the Title Height as 5 mm with no change.
20. Press the
* REPRINT key to accept Print Status as “2-All Print” with no change.
21. Press the
* REPRINT key to accept the Character Size as M2 with no change. This will bring you back to
the Part Number programming mode opening screen.
22. To move to the item number for Barcode, enter 12 from the numeric keypad and press the
+ (plus) key.
(see Table 7-6 for item numbers) Then press the
* REPRINT key to enter the Barcode programming mode.
23. In the Barcode programming mode, you have to select which barcode (ID Code, Unit Weight, Tare
Weight or Quantity) you want to program using the
<< and >> keys. Since the ID Code Barcode is the
first selection to appear, you can simply press the * REPRINT key to accept that selection.
24. Enter 31 to change the X Position from 0 mm to 31 mm, then press the
* REPRINT key.
25. Enter 33 to change the Y Position from 0 mm to 33 mm, then press the
* REPRINT key.
26. Press the
* REPRINT key to leave the Angle of 0 Degrees unchanged.
27. Enter 7 to change the Height from 0 mm to 7 mm, then press the
* REPRINT key.
28. Enter 2 to change the Print Status from “0-No Print” to “2-All Print” and press the
* REPRINT key. This
will bring you back to the ID Code Barcode programming mode opening screen. To exit the Barcode
Programming section and return to the list of items that can be programmed, press the TARE key.
29. To move to the item number for Status, enter 22 from the numeric keypad and press the
+ (plus) key. (see
Table 7-6 for item numbers) Then press the
* REPRINT key to enter the Status programming mode.
30. Press the
* REPRINT key to accept the X Position as 0, then press the * REPRINT key.
31. Enter 0 to change the Y Position from 8 mm to 0 mm, then press the
* REPRINT key.
32. Press the
* REPRINT key to leave the Angle of 0 degrees unchanged.
33. Enter a 0 to change the Print Status from “2-All Print” to “0-No Print” and press the
* REPRINT key. This
will keep this field from printing on the label.
34. Press the
* REPRINT key to leave the Character Size of M2 unchanged. This will bring you back to the
Status programming mode opening screen.
35. To move to the item number for Title ID, enter 42 from the numeric keypad and press the
+ (plus) key.
(see Table 7-6 for item numbers) Then press the
* REPRINT key to enter the Title ID programming mode.
36. Press the
* REPRINT key to accept 0 mm as the X Position, then press the * REPRINT key.
37. Enter 35 to change the Y Position from 0 mm to 35 mm, then press the
* REPRINT key.
38. Press the
* REPRINT key to leave the Angle of 0 Degrees unchanged.
39. Enter 2 to change the Print Status from “0-No Print” to “2-All Print”, then press the
* REPRINT key.
40. Use the
<< and >> keys to change the Character Size from S5 to M3, then press the * REPRINT key.
41. Since Title Part No. is item #45 and we are currently at item #42, you can move to it simply by pressing
the
+ key three times. Then press the * REPRINT key to enter the Title Part No. programming mode.
42. Press the
* REPRINT key to accept 0 mm as the X Position, then press the * REPRINT key.
43. Enter 21 to change the Y Position from 0 mm to 21 mm, then press the
* REPRINT key.
44. Press the
* REPRINT key to leave the Angle of 0 Degrees unchanged.
45. Enter 2 to change the Print Status from “0-No Print” to “2-All Print”, then press the
* REPRINT key.
46. Use the
<< and >> keys to change the Character Size from S5 to M3, then press the * REPRINT key. This