Specifications

1.5. Key Functions
KEY FUNCTIONS
ON/OFF For turning the machine ON and OFF.
0 TO 9 Numeric Keys.
.
Decimal Point.
REZERO Used to reset the scale to zero. Used to enter the maintenance
mode along with other keys
TARE Used for setting and clearing tare weight.
Kg/Lb Used to change the weighing unit between Kilogram and
Pound. (Used in Weight Mode)
CLEAR Used to clear the key entries and unit weight. (See Spc 6 Bit 2)
NET/GROSS Used to change between Gross and Net. Also used as
inventory key
UNIT WEIGHT Used to enter the unit weight using numeric keyboard.
MODE Used for entering programming mode from weighing mode.
SCALE Used to switch between different scales
+
Used for Accumulation function and for incrementing SPEC
numbers in SPEC setting mode. Also used to program set point
in programming mode
−−
−−
Used for Subtraction function and for decrementing SPEC
numbers in SPEC setting mode. Also use to program Part No
in programming item. In Programming mode , it can be used for
viewing or setting date/time.
*
Used for storing the specification data and used to print out
weight information when printer is connected.
CODE
IN/OUT
[CODE] key, for calling out ITEM memory data. Also used to
program commodity name in programming mode
PIECES Used for computing unit weight by sampling.