Specifications

DC-190 RS-232 specification (continued)
(i) HEADER WITH HEADER CODE (ii) HEADER WITH TITLE
Header Code is sent before the data to indicate
type of the data.
Title is sent before the data to indicate type of the
data. This can be used only when RS232 Output is
set to Counting Condition, With Header and Title.
The following type of data can be sent: The following type of data can be sent:
Header Code ASCII Code Data Title Data
030Net Weight NET WEIGHT Net Weight
131Unit Weight UNIT WEIGHT Unit Weight
232Quantity QUANTITY Quantity
333ID Code ID CODE ID Code
434Tare Weight TARE Tare Weight
A41Gross Weight GROSS WEIGHT Gross Weight
B42Status STATUS Status
C43Date &Time DATE & TIME Date &Time
F46Set Point 1
[
W
]
SET P1(W) Set Point 1
[
W
]
G47Set Point 1 [Q] SET P1(Q) Set Point 1 [Q]
H48Set Point 2 SET P2 Set Point 2
I49Total Quantity TOTAL QUANTITY Total Quantity
K4BInventory INVENTORY Inventory
M4DPart No PART NO Part No
N4EPart Name PART NAME Part Name
V56Scale No SCALE NO Scale No
Q51Set Point 3 SET P3 Set Point 3
X58Set Point 4 SET P4 Set Point 4
U55Set Point 5 SET P5 Set Point 5
O4FSet Point 6 SET P6 Set Point 6
B) Without Header (SPEC12 BIT 0 set to 1)
DATA CR DATA CR
………
CR LF
One Data Block consists of “DATA” & “CR”.
“CR” must be added at the end of the data.
“LF” must be added at the end as a termination code of the transmission.