Specifications

6.6. DC-190 RS-232 PORT SELECTION CHART
The DC-190 has two R-232 ports for use with a force balance, printer, and or PC.
Only two options are available at one time. When selecting the options to be used the
ports are also being selected in the following manner.
There are two primary port options and one secondary port option.
The Force Balance port is a primary port option controlled by spec 8 & 9.
The printer port is a primary port option controlled by specs 10 & 11.
The PC is a secondary port option and is controlled by the port option selected
in spec 13, the primary option selected in spec 13 assumes its port and the PC assumes
the remaining port. If two peripheral devices are turned on but only one device is
installed on the scale an error message will appear on the scale.
13
0 0 0 1
RS232(PC/PRN)
Header:
0: Code
1: Title
RS232 CONNECTOR
Sub Din
000: Printer Force Bal.
001: Force Bal. Printer
100: PC Force Bal.
101: Force Bal PC
010: Printer PC (*1)
011: PC Printer(*2)
SPEC 13
SUB DIN CONTROL SPECS (SUB) CONTROL SPECS (DIN)
000: Printer Force Bal. 10 & 11 PRINTER 8 & 9 F.B.
001: Force Bal. Printer 8 & 9 Force Bal. 10 & 11 PRINTER
100:PC Force Bal. 10 & 11 PC 8 & 9 Force Bal.
101: Force Bal. PC 8 & 9 Force Bal. 10 & 11 PC
010: Printer PC 10 & 11 Printer 8 & 9 PC
011:PC Printer 8 & 9 PC 10 & 11 Printer