Specifications
6.5. DC-190 Specification List ver.3.37 (continued)
10
1 1 1 1
RS-232C
Connection
(PC / Printer)
0 : No
1 : Yes
RS-232C
(PC/PRN)
Data Length
0 :7 bits 1 :8 bits
RS-232C (PC/PRN) Baud Rate
00 : 19200 10 : 4800
01 : 38400 11 : 9600
PRINTER:
0: Eltron
1: BCP-30 or Epson
11
0 1 0 0
RS-232C
(PC/PRN)
Stop Bit
0 : 1 bit 1 : 2 bits
0 = output on RS-232
comma delimited file
1 = paper tape output
on printer port (in prog mode)
RS-232C (PC/PRN)Parity Bit
00 : No 10 : Not Used
01 : Odd 11 : Even
12
1 0 0 0
RS-232 (PC/PRN) Output
(Optional)
00 : Not Available
01 : When Counting Condition(PC)
10 : By # Key
11 : In Both Cases (DP122)
SET TO “0”
RS232C (PC/PRN)
With Header
0: Yes
1: No
RS232 CONNECTOR
Sub Din Sub Din
000: Printer Force Bal. 101: Force Bal, PC
001: Force Bal. Printer 010: Printer PC
13
0 0 0 1
RS232(PC/PRN)
Header:
0: Code
1: Title
100: PC Force Bal. 011: PC Printer
14
1 0 1 0
RS-232C
Connection
(Bar-code Pen)
0 : No 1 : Yes
RS-232C (BCP)
Data Length
0 :7 bits1 : 8 bits
RS-232C (BCP) Baud Rate
00 : 19200 10 : 4800
01 : 38400 11 : 9600
15
0 0 1 1
RS-232C (BCP)
Stop Bit
0 : 1 bit 1 : 2 bits
RS232C (BCP)
With Header
0: Yes
1: No
RS-232C (BCP)Parity Bit
00 : No 10 : Not Used
01 : Odd 11 : Even
∗∗
∗∗
∗∗
∗∗
∗∗
∗∗
SPEC 16 & 17 SHOULD ONLY BE CHANGED BY AN AUTHORIZED SERVICE TECHNICIAN
!!!
16
∗∗
∗∗
∗∗
∗∗
∗∗
∗∗
Normally
Set
0 0 0 1
_ _ _ _
SCALE 1:
00: Internal Scale 1
01: Internal Scale 2
10: External Scale
11: Force Balance
SCALE 2:
00: Internal Scale 1
01: Internal Scale 2
10: External Scale
11: Force Balance
17
∗∗
∗∗
∗∗
∗∗
∗∗
∗∗
Normally
Set
1 0 1 1
_ _ _ _
SCALE 3:
00: Internal Scale 1
01: Internal Scale 2
10: External Scale
11: Force Balance
SCALE 4:
00: Internal Scale 1
01: Internal Scale 2
10: External Scale
11: Force Balance
ALL SCALES ARE UNIQUE AND EACH MUST HAVE THEIR OWN CHANNEL LOCATION.
18
0 0 0 0
Set Point TTL Output
0: Active Low
1: Active High
Number Of Set Point
000: 2 Set Points
001: 3 Set Points
010: 4 Set Points
011: 5 Set Points
100: 6 Set Points
19
1 0 0 0
Display “Not F” Message
For Items Not Stored In
Memory
0 : Yes 1 : No
Link To IMS
0 : No
1 : Yes
Type of Force
Balance (Japan
Version Only)
0: SHG-300
1: HR-60
Print When Pressing
+ or – key in Add
Mode
0: yes
1: No