Specifications

4.5. Subtraction/Reduction Operation : When Spec32 bit1 (Auto Exit From Accumulation) is enabled.
The Scale will automatically go back to Weight Mode after the Accumulation Mode.
1 Display in the weighing mode with memory lamp glowing.
from previous operation (See 4.4.)
2 Press the [++
++
] key. The Total Is Displayed in the Quantity Display.
3 Remove the 2.0 lb. Weight from platter
Leave only the 1.0lb weight on the platter.
4 Pressing the [−−
−−
] key deducts the quantity of 5 in the Quantity Display from the
previous Total of 70 to give us a total of 65.
5 The memory lamp will glow. After a moment the scale will resume operation mode.
6 Press the [−−
−−
] key. The total quantity after subtracting is shown in the Quantity
Display. 65 -5 =60
7 The memory lamp will glow. After a moment the scale will resume operation mode.
4.6. Clearing of Accumulated Data :
1 From previous operations (See 4.4. & 4.5.)
2 Pressing the [∗∗
∗∗
] key, clears the accumulated total.
4.7. Clearing Unit Weight :
1 Remove weight.
2 Pressing the [CLEAR] key, clears the unit weight.