Specifications

95
SPEC 08 ; Print in-count (receiving) on item report
(This activates only when SPEC 00 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 09 ; Print tare weight on item report
(This activates only when SPEC 00 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 10 ; Print set point value on item report
(This activates only when SPEC 00 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 11 ; Print selected scale no. on item report
(This activates only when SPEC 00 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 12 ; Print auto job no. for shipping operation on item report
(This activates only when SPEC 00 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 13 ; Print auto job no. for receiving operation on item report
(This activates only when SPEC 00 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 14 ; Print auto job no. for counting operation on item report
(This activates only when SPEC 00 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 15 ; PRINT TODAY’S MOVEMENT REPORT
ALL
: All items
SELECT : Selected items
SPEC 16 ; Print part no. on today’s movement report
(This activates only when SPEC 15 of REPORT spec is set to “SELECT” )
Y : Allow
N
: Inhibit
SPEC 17 ; Print part name on today’s movement report
(This activates only when SPEC 15 of REPORT spec is set to “SELECT”)
Y : Allow
N
: Inhibit
SPEC 18 ; Print unit weight on today’s movement report
(This activates only when SPEC 15 of REPORT spec is set to “SELECT”)
Y : Allow
N
: Inhibit