Specifications

91
3.
KEY FUNCTIONS IN MAINTENANCE MODE
[MODE] Key
To return to the first screen of each mode without saving programmed data.
[AUTO/MANUAL] key
To return to the previous screen in programming without saving programmed data.
[∗
∗∗
∗/
//
/ENTER] key
To enter the next screen in each heading.
To enter the programmed data into memory file.
To execute the data transaction.
To print SPEC report.
[ TARE ←
←←
←] and [UNIT WEIGHT →
→→
→] key
To select the headings in loop routines.
To move the cursor to left/right when there are multiple cursors in a display.
[+
++
+] and [−
−−
−] key
To select the data, when cursor (triangle indicator) is blinking.
CURSORS
In Programming mode, cursors indicate the programmable item. There are two kinds of
cursors
which are used to classify the programable data.
1.) Solid light cursor ..... The data above a solid light cursor can be programmed by
key entry.
2.) Blinking cursor .... The data above a blinking cursor can only be selected from
some pre-determined values. The selection can be made by pressing
[+
++
+] and [−
−−
−] keys.