Specifications

87
ON SCALE
NOTE 1:" Print Spec #31 FREE FORMAT = N (If set to Y than only FREE
FORMAT labels will be produced)
NOTE 2: " Address locations # 1-9 are available internal programable memory.
Address location # 10 is now used as a temporary location for address
IMS. (See Below)
1. Select print format #7.
2., Select #11 to a maximum of 9999 to access the Address Data Base.
3. Press Print Key.
ON SCALE USING SCANNER
NOTE: SAME AS ABOVE
1. Select print format #7.
2. Select address # 10 ONLY.
3. Scan each line of information, which contain the proper headers listed above.
4. Print a label.
80. 2.12.3. DELETION OF PROGRAMMED DATA
(6) Select address no. and press [∗
∗∗
∗/
//
/ENTER] key
( 32 )
to call the programmed address data.
. . . . . . . . . . . . . . . . . . . . .
Z S R K 1 2 3 I R I M I 0 1 2 3 4 5 6 7 8
Note) " [TARE←
←←
←] and [UNIT WEIGHT→
→→
→] keys are used for scrolling the display of
programmed data to left or right sides to check the data.
2. Press [CLEAR] key to enter the deletion
screen.
DEL,
. . . . . . . . . . . . . . . . . . . . .
Z S R K 1 2 3 I R I M I 0 1 2 3 4 5 6 7 8
3. Press [Y] key to execute the deletion of the data.
The display is back to the address no. heading.
Press [N] key to escape the deletion screen.
The display is back to the previous screen.