Specifications

83
A-2. THE LABEL FORMAT LIST FOR THE SAMPLE LABEL
Print angle = 270
DATA Digits
no.
X
position
Y
position
S size M size
ID CODE 200 545 S2 M2
P. NO. (L1) 32 50 650 S1 M1
P NAME (L1) 32 100 650 S1 M1
LOCATION NO. 380 686 S1 M2
BARCODE (ID) 280 750 H0 A3
TEXT 4 100 750 S1 M2
TEXT 5 50 750 S1 M1
TEXT 6 200 50 S1 M2
B. Set “64mm x120mm” on address 34 (size of label format) in PRINT SPEC in
MAINTENANCE MODE. Refer to 3-3 METHOD OF PROGRAM.
C. Change the print data of label format data. Refer to 2-10 FREE FORMAT PROGRAM.
E-1 Set angle of label format ...... 270 degree
E-2 Set the data for ID code. (X=200, Y=600, S2, M2)
E-3 Set the data for part code. (L1/ D=32, X=50, Y=600, S1, M1)
E-4 Set the data for part name. (L1/ D=32,X=100, Y=600, S1,M1)
E-5 Set the data for location no. (X=380, Y=686, S1, M2)
E-6 Set the data for bar-code of ID code ( X=280, Y=750, H0, A3)
E-7 Set the data for text 4. ( X=100, Y=750, S1, M2)
E-8 Set the data for text 5. (X=50, Y=750, S1, M1)
E-9 Set the data for text 6. (X=200, Y=50, S1, M1)
NOTE) " In each step on setting print data, we recommend, you would check with the test
print if the print position and character size are fit. If they are not, adjust the print
position before setting the next data.
SAMPLE OF TEST
LABEL