Specifications

46
37. 2.3.3 DELETION OF PROGRAMMED ID CODE
and ITEM DATA
1. Select ID code and press [∗
∗∗
∗ ENTER]
key.
ID= ENTER ID CODE
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
2. Enter ID code which is in memory file and
press [CODE] key. i.e.) ABC-100125
DEL ABC-100125
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
NOTE
) "
If the entered ID code exists in memory files, the choice to delete all data or
not must be made by pressing [Y] key to delete entire file or [N] key to advance.
3. Press [ N ] key to enter ID CODE fields.
- 0.50 87.100 0
∇
∇∇
∇ ∇
∇∇
∇ ∇
∇∇
∇ ∇
∇∇
∇
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
4. Press [ SHIFT↓
↓↓
↓] key, then [B/
PART NAME
]
P.NA=E L E C T R O L I T I C C A P
key to recall programmed data of
parts name.
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
5. Press [CLEAR] key to enter the deletion
DEL ITEM-NO. H 1 - 1357E-01
screen.
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
6. To delete programmed data, press - 0.50 87.100 0
[Y] key, or [N] to keep data.
∇
∇∇
∇ ∇
∇∇
∇ ∇
∇∇
∇ ∇
∇∇
∇
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
7. Press [∗
∗∗
∗ ENTER] key to select ID CODE,
ID = ENTER ID CODE
then revise data in memory file.
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
Note 1)
"
[TARE
←
←←
←
] key is used for scrolling UP the display of the programmed data to the left edge
[UNIT WEIGHT
→
→→
→
] key is used for scrolling DOWN the display of the programmed data to the right edge.
Note 2)
"
You can delete any of the following item data with the same operation as the above
(Part no. , Part name , Shelf location number , Inventory , Set point ,
Threshold , Scale no., and Auto job no.)