Specifications

45
NOTE 1
) "
If the sample quantity is 10 pcs for computing unit weight, press the [PIECES] key
without the necessity of entering the digits “1 & 0” characters as in the first sample.
NOTE 2
) "
To clear unit weight value, enter [ 0 ] and press [ UNIT WEIGHHT ] key.
NOTE 3)
"
To have accurate unit weight calculation, the sample weight must be more than the
insufficient range of the scale. (Insufficient range is 0.0% ~ 0.7 % of scale capacity)
The factory default is set at 0.1%
NOTE 4)
"
If sample weight is less than 0.1%, the display shows the following massage. In this
example case, the sample weight is insufficient
to calculate a reliable unit weight.
Place the additional sample pieces on the scale, for accurate sample and
press [PIECES ] key again.
- - - ADD XX
.
. . . . . . . . . . . . . . . . . . .
Z S T K 1 2 3 I R I M O 1 2 3 4 5 6 7 8
After you set all the item data in ID code file, press [ENTER] key
to save the data into MEMORY FILE.
The display goes back to the initial screen of “ID=ENTER ID CODE”.