Specifications
38
36.
2.3.1
ID CODE - DATA STORAGE IN
MEMORY
ID Code allows you to store information in memory through program mode. The following information may
be programmed in each ID Code data storage address. The field length will vary with each line of data
from one digit to 32 digits.
Inventory Data Storage Fields
Field Length
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32
1. ID Code
2.
Part Number
3. Part Name
4. Unit Weight
5. Stock Location
0 1 Z Z
6 Inventory Balance
7. Threshold Reorder Point
8. Tare Weight
9. Set Point Quantity/Wgt .
10. Scale to Use.
NOTE: Fill in blank spaces with data. From 1 to 32 digits. When entering multiple data items, use IBM
AT keyboard, or duplicate this chart before manually entering data into memory for each Code Number.
TASK
PROCEDURE
Program Item Data Press Mode Key to Program, Press ENTER key
PRG: ID CODE Press ENTER ID = Enter ID Code
1. Enter A/N ID Code
Press A/N Keys to enter the specific ID Code, Press CODE Key *
"
1
All other lines of data can be entered at random, To Exit, Press ENTER Key
2.
Enter Part Number
A/N Keys, SHIFT DN, then PART NO. (A) key *
"
2
3 Enter Part Name
A/N Keys, SHIFT DN, then PART NAME (B) key *
"
2
4. Enter Unit Weight Sample New UW or Keyboard enter known UW, Press U/ W key
5. Enter Location
Enter all eight digits, Press SHIFT DN then LOCATION (C) key *
"
2
6. Enter Inventory Balance Enter Starting Quantity, Press SHIFT DN then INVENT (D) key
7. Enter Threshold
Enter Re-Order point Quantity, Press SHIFT DN then Th’Hold (E) key *
"
2
8. Enter Tare Weight Enter known tare weight from keyboard, Press TARE key or Place tare weight
on scale, then Press TARE key. Tare weight must be less than scale capacity.
9. Enter Set Point Press SHIFT DN, SETPOINT (F) key, then Enter Quantity, Press SETPOINT
(F) key, Press RIGHT-> key, then Enter %, Press SETPOINT (F) key twice.
To view data Press SHIFT DN, SETPOINT (F) again.
10.Select Scale Enter Scale Number 1,2, or 3 , then Press SHIFT DN SCALE (G) key,
NOTE *
"
1) Always enter ID Code FIRST: i.e. Enter “ABC-123” Up to 16 A/N characters in Length.
*
"
2) Recall entry, Press SHIFT DN then item data key,
Press CLEAR to Delete, respond with ( Y = Yes or N = No )
*
"
3) AUTO/Manual Key Undo last action.