Specifications

37
35.
2.3 ID CODE PROGRAMMING
All the following programmable Data Items are linked to ID CODE.
1. ID CODE ---
Max. 16 digit Alpha-Numeric data.
2. UNIT WEIGHT ---
Max. 5 digit Numeric data and decimal point.
Unit weight can be entered by using sample counting
or direct key
entry
when unit weight is known.
PRESS [UNIT WEIGHT/→
→→
→] key.
3. TARE WEIGHT ---
Max. 5 digit Numeric data and decimal point. Tare weight can
entered by one touch tare entry
or direct key entry when tare
weight is known.
PRESS [TARE/←
←←
←] key.
4. PART NO. ---
Max. 32 digit Alpha-Numeric data. Enter Part number
PRESS [SHIFT ↓
↓↓
↓ ] key, then [A/
PART NO.
] key.
5. PART NAME --- Max. 32 digit Alpha-Numeric data. Part name can be changed
in operation mode temporarily, then printed in OPN Mode
without changing memory file.
PRESS [SHIFT ↓
↓↓
↓ ] key, then [B /
PART NAME
] key.
6. LOCATION --- Max. 8 digit Alpha-Numeric data defined by limits.
PRESS [SHIFT ↓
↓↓
↓ ] key, then [C /
LOCATION
] key.
7. INVENTORY --- Max. 8 digit Numeric data and minus. After you enter the
initial quantity of stock, it is adjusted with receiving IN or
shipping OUT transactions.
PRESS [SHIFT ↓
↓↓
↓ ] key, then [D/
INVENTORY
] key.
8 THRESHOLD --- Max. 8 digit Numeric data. Threshold is minimum quantity
maintained and point when reordered for stock.
PRESS [SHIFT ↓
↓↓
↓ ] key, then [E /
THRESHOLD
]key.
9. SET POINT --- According to SPEC setting in maintenance mode.
(Quantity = 7 digit, percentage = 2 digit + decimal)
10. SCALE --- 1 digit 1~3. Select the scale platform that can accommodate
the parts to be counted, 1 - 2 - 3.
PRESS [SHIFT ↓
↓↓
↓ ] key, then [G /
SCALE
]key.
11. In /Out / Non-add ---1 digit 1~5. Auto Job Pattern number can be selected for
receiving/shipping/ checking operation for each ID CODE
independently.