Specifications

36
34.
2.2 KEY FUNCTION IN
PROGRAM MODE
[MODE] Key :
To return to the initial screen of each mode without saving programed data.
[AUTO/MANUAL] Key :
To return to the previous screen in programming.
[∗
∗∗
∗/ENTER] Key :
To enter the next screen in each file.
To enter the programmed data into memory file.
[CLEAR] Key :
To clear mis-set data.
To enter the deletion screen of programmed data.
(LEFT) [TARE/←
←←
←] and (RIGHT) [UNIT WEIGHT /→
→→
→] Key :
To select the headings in loop routines.
To move the cursor to left/right when there are plural cursors in a display.
[
+
++
+
] and [
−
−−
−
] Key :
To select the data, when cursor of triangle indicator is blinking.
CURSORS
In Programming mode there are two kinds of cursors used:
1.) Lighted cursor ..... The data above lighted cursor should be programmed
by the key entry.
2.) Blinking cursor .... The data above blinking cursor should be selected from
a list of choices.
The selection is to be made by pressing plus or minus keys.