Specifications

11. OVERVIEW OF SET POINT OUTPUT

Two target values can be programmed for each ID CODE in Memory. A beep sounds to

indicate when the target value is reached. (SET1/SET2.)

The combination of SET1 and SET2 can be selected as follows in Maintenance mode.

COMBINATION SET POINT 1 SET POINT 2

QUANTITY & PERCENTAGE QUANTITY % OF SET POINT 1

QUANTITY & PERCENTAGE ( TO STOP QUANTITY % OF SET POINT 1

WEIGHT & PERCENTAGE WEIGHT(g) % OF SET POINT 1

UPPER LIMIT & LOWER LIMIT OF WEIGHT UPPER LIMIT LOWER LIMIT

UPPER LIMIT & LOWER LIMIT OF QUANTITY UPPER LIMIT LOWER LIMIT

I.E.: COMBINATION = QUANTITY (25,000 PCS.) & 80 %

INTERMITTENT CONTINUOUS

SET POINT 2 SET POINT 1

0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 80 % 25,000 PCS

20,000 PCS TOTAL

* When the weight value is a equal to (or over) the target SET1, intermittent buzzer

sounds. When the weight value is a equal to (or over) the target SET2, buzzer change

to continuous.