Specifications

116
3. Press [∗
∗∗
∗/
//
/ENTER] key.
ADJ : FEED VALUE
. . . . . . . . . . . . . . . . . . .
.
Z S T K 1 2 3 I R M I O 1 2 3 4 5 6 7
8
4. Press [∗
∗∗
∗/
//
/ENTER] key then adjust feed value
with
[ + ] and [ −
−−
− ] keys.
FEED VALUE = 12
♦♦♦♦
Ex) feed value = +12
• • • • • • • • • • • • • • • • • •
• •
Z S T K 1 2 3 I R M I O 1 2 3 4 5 6 7
8
5. Press [AUTO/MANUAL] key to escape the
programming screen.
7. DETECTION LEVEL
“Detection Level” is the performance of the sensor for paper quality of label roll. Detection
level is to be adjusted automatically on feeding out labels. However, when you use special
label such as mirror-coated thermal label or color label, the sensor cannot detect the gaps
between labels correctly in some case. After setting certain value, press feed key to check the
detection level is correct.
LEVEL ( 2 8) = 0
♦ ♦ ♦ ♦
• • • • • • • • • • • • • • • • • • • •
Z S T K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
Detection level
Key functions [ + ] key is used for the increment of the feed value. (Max. = +127)
[ −
−−
− ] key is used for the decrement of the feed value. (Min. = -127)
[→
→→
→ ] (feed )key is used for feeding label to check the proper detection level.