Specifications

115
5.
PRINT ADJUSTMENT
You can adjust the performance of printer block. You can adjust the performance of printer
with FEED VALUE, LEVEL OF DETECTION, and PRINT CONTRAST.
6. FEED VALUE
“Feed Value” is the feed value after printing the former label.
Feed value is to be set at 0 value, if the correct label size are set with the correct print format.
However, if you are unable to get the correct position, you can adjust the feed length by
adjusting FEED VALUE.
F E E D V A L U E = 0
♦ ♦ ♦ ♦
• • • • • • • • • • • • • • • • • • • •
Z S T K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
Key functions [ +
++
+ ] key is used for the increment of the feed value. (Max. = +127)
[ −
−−
− ] key is used for the decrement of the feed value. (Min. = -127)
[→
→→
→ ](feed ) key is used for feeding label to check the proper feed value.
Programming operation
1. Enter Maintenance mode. MTN : SET SPEC CODES
. . . . . . . . . . . . . . . . . . .
.
Z S T K 1 2 3 I R M I O 1 2 3 4 5 6 7
8
2. Select Print Adjustment with [TARE←
←←
← ] or
[UNIT WEIGHT→
→→
→.] keys.
MTN : PRINT ADJUSTMTNT
. . . . . . . . . . . . . . . . . . .
.
Z S T K 1 2 3 I R M I O 1 2 3 4 5 6 7
8