Specifications

107
MISC SPECS
SPEC 00 : Set point function
ALL : Allowed for all item (Items with ID code and pre-programmed set points will take priority)
NONE
: Prohibit
E-CODE : Allowed for items which have ID code.
N-CODE : Allowed for items which do not have ID code.
SPEC 01 : Type of set point value
RESULT %
: Quantity and %
RES.MIN&MAX : Quantities of minimum value and maximum value
WEIGHT% : Weight value and %
WT..MIN&MAX : Minimum weight value and Maximum weight value
RECOMP.COU% : Quantity and % on re-computing
SPEC 02 : Hold last Lot no.
Y : Allow
N
: Prohibit
SPEC 03 : Deduct items from inventory with non-add (counting) operation
RENEW : Allow
KEEP
: Prohibit
SPEC 04 : Auto job operation no. for out (shipping ) operation
( This activates only for items which do not have an auto job operation no. in ID code)
PAT1
: Pattern 1 PAT4 : Pattern 4
PAT2 : Pattern 2 PAT5 : Pattern 5
PAT3 : Pattern 3
SPEC 05 : Auto job operation no. for in (receiving) operation
( This activates only for items which do not have an auto job operation no. in ID code)
PAT1
: Pattern 1 PAT4 : Pattern 4
PAT2 : Pattern 2 PAT5 : Pattern 5
PAT3 : Pattern 3
SPEC 06 : Auto job operation no. for non-add (counting ) operation
( This activates only for items which do not have an auto job operation no. in ID code)
PAT1
: Pattern 1 PAT4 : Pattern 4
PAT2 : Pattern 2 PAT5 : Pattern 5
PAT3 : Pattern 3