Specifications

Introduction 3
1.3.3 Key Functions
The DC-782 features many functions for managing inventory information and scale operation. Figure 1-2 shows
the key-sheet and Table 1-4 lists the keys and key functions of the DC-782 keyboard.
Figure 1-2. Key Sheet Layout
Some keys have different functions depending on what mode or function you are in.
Key Description
ON/OFF - Turns the scale display on or off
Numeric keys - Used to enter numeric values. When using the scale, first enter a numeric
value, then press the appropriate function key.
DECIMAL key - Used to set the decimal point.
CLEAR key.
Weighing Mode - Used to clear the Unit Weight. Used to return to the weighing display when
doing accumulation.
Programming Mode - Used to delete an Item Code or assoc
iated value when programming item
codes. Used to Cancel input in programming SPEC codes.
Pieces key - Used for computing unit weight by sampling.
TARE key.
Weighing Mode - Used to set or clear the tare value.
Programming Mode - Used to store SPEC changes and escape to the Weighing Mode when
programming specifications.
Maintenance Mode - Used to escape to the W
eighing Mode from the Maintenance Mode.
REZERO key.
Weighing Mode - Used to reset the weight display to zero.
- (Minus) key.
Weighing Mode - Used to delete a character entered during operations. Used to subtract a
quant
ity during accumulation. Also prompts outputting data to a PC if one
is connected.
Programming Mode - Used to navigate to the pr
evious specification when programming SPEC
codes.
Table 1-4. DC-782 Key Functions
to