Specifications

Scale Programming 25
6.0 Scale Programming
The DC-782 can store information for the parts you count most frequently, eliminating the need for re-entering
data during parts counting. With each Item Code you can specify a Tare Weight, Unit Weight, and Setpoint Value.
Up to 25 items can be programmed into your DC-782 counting scale, with as many as 10 of those being able to
be assigned to the preset keys (P1 to P10).
6.1 Checking Memory Status
To see how many items of the 25 capacity have already been programmed, press the MODE key twice to enter
the Programming Mode. The display will show ProG and the scale will display the
PRG indicator, indicating the
that you are in the programming mode, will illuminate. The total number of Item Codes currently in memory
will appear in the Quantity column on the display.
6.2 Program Item Code, Tare Weight, Unit Weight, Setpoint 1 and 2
The DC-782 has the capacity to store information on up to 25 items (10 of which can be assigned to the preset
keys 1-10). This section details the procedure for storing the item code, tare weight, unit weight, and set points to
be associated with and item code. You can enter all of this information for each item code or only the data
pertinent to your application. The memory fields associated with item codes can be programmed subject to the
following parameters:
1. Press MODE key twice t
o enter the Programming Mode. The display will show ProG. The number of
items currently programmed into memory will appear in the QTY column on the scale display.
2. Enter the Item Code number and press the * key
. (The maximum length of the field is 2 characters.)
NOTE: If you enter an Item Code that has already been stored in memory, the scale will display the Unit Weight associated with
that item code. To keep the current settings, press the
* key to move through the fields or press the MODE key once
Parameters Format and Maximum Length
Item Code 2 digits numeric
Tare Weight 5 digits plus the decimal point
Unit Weight 5 digits plus the decimal point
Setpoint Value 5 digits plus the decimal point
Table 6-1. Format and Length of Item Code Memory Fields