Specifications

24 DC-782 Operation Manual
4. If at the end of the procedure, if you want to see how many remain in the bin or container, you first have
to know the tare weight of the bin or container. After removing the parts you want to take out of the bin,
simply digitally enter the tare weight of the bin and press the TARE key. The scale will display how
many parts were left in the bin.
If a PC is connected to the DC
-782, pressing the * CONFIRM key will output the data to the PC.
5.4.2.4 Negative Counting - Total Removed Displayed at the End
With this procedure you can count accurately out of a full container for kiting, shipping, etc.without having to
know the tare weight of the container.
1. Place a full container on the scale and press TA
RE.
2. Remove a 10 piece sample from the container and press PIECES. After the unit weight has been
calculated, return the
10 piece sample to the container.
3. Remove the number of pieces you need for kiting, shipping, etc. The amount re
moved will be displayed
in the QUANTITY window. The Memory indicator will be illuminated and the scale displays the
accumulated total of pieces removed so far. Then press the TARE key while the total is still shown on
the display.
4. After removing each batch of pieces, press the + (Plus) ke
y, then the TARE key (while the total is still
showing on the display).
5. When you have removed the last batch of pieces, press the * CONFI
RM key to show the total number of
pieces you have counted out of the full container. (Again you must press the * CONFIRM key while the
total is shown on the display.) If a PC is connected to the DC-782, pressing the * CONFIRM key will
output the data to the PC. The Memory indicator will no longer be illuminated.
5.4.2.5 Clearing Accumulated Data
To clear accumulated data, press the *CONFIRM key. The Memory indicator will no longer be illuminated.
5.5 Using Item Codes in Weighing Mode
The following paragraphs describe the procedure to recall item codes, view the information stored in memory
with an Item Code, carry out inventory operations related to the item code quantity, and delete an item code.
NOTE: For these functions to work, information has to ha
ve been previously programmed for the item code
being recalled. For more information on how to program an item code, see Section 6.2.
5.5.1 Recalling Item Codes using Item Code Number
The following procedure allows you recall item codes stored in memory.
1. Enter a numeric Item Code using the numeric keypad.
2. Press the # key t
o call up the item.
If an Item Code not stored in memory is
entered, the scale will beep to indicate that the action cannot be
completed.
If an Item Code existing in memory
is entered, the stored Unit Weight will be displayed after the # key is pressed.
Weighing operations can now be carried out utilizing the Tare Weight, Unit Weight, and Set Point stored with
that Item Code.
Press the CLEAR key
to clear the item information and return to stand-by status.
5.5.2 Delete Item Memory
Deletion of an Item Code with all of its associated information (Tare Weight, Unit Weight, and Setpoints) can
only be done from the item programming mode. See Section 6.5 for procedures on deleting item codes or
specific items associated with item codes.