User`s guide

System status LEDs
243
ConnectPort X8 LEDs and buttons
LED/button Color and Light
Pattern
Description
Power LED Green Power is applied.
Not illuminated No power.
Status LED Blinks during product initialization and factory reset, using the light
patterns below. This LED should never blink during normal operation. If
it blinks constantly, contact Digi Technical Support.
Solid red Hardware is initializing.
1-1-1 blinking
green
Firmware is initializing.
1-5-1 blinking
green
Device configuration has been restored to its factory defaults.
Other blinking
green
Contact Digi Technical Support.
Solid green Device is powered on and ready for operation.
Ethernet Link
LED
Solid yellow Ethernet link is up.
Ethernet
Activity LED
Blinking green Ethernet traffic is on the link.
Cellular Link
LED
Solid yellow Cellular link is up.
Cellular
Activity LEDs
Blinking green Cellular traffic is on the link.
Cellular Signal
Strength LEDs
Blue Relative signal strength indicator (RSSI), shown as a number of LEDs.
0: signal strength unknown or unacceptable
1: signal strength low/weak
5: signal strength high/excellent
Specific dB values for the signal can be found via the web interface; go to
Administration > System Information > Mobile. Under Mobile
Connection, the signal strength is displayed in bars and dBm. Or, from
the command line. enter the display mobile command.