User`s guide

System status LEDs
240
ConnectPort X4 and ConnectPort X4 H LEDs and buttons
LED/button Color and Light
Pattern
Description
Power LED Green Power is applied.
Not illuminated No power.
Status LED Yellow Blinks during product initialization and factory reset, using the light
patterns below. During normal device operation after initialization and
factory reset, this LED is off and should never blink. If it blinks
constantly, contact Digi Technical Support.
1-1-1 blinking
yellow
Firmware is initializing.
1-5-1 blinking
yellow
Device configuration has been restored to its factory defaults.
Other blinking
yellow
Contact Digi Technical Support.
Cellular Link
LED
Solid yellow Cellular link is up.
Cellular
Activity LEDs
Blinking green Cellular traffic is on the link.
Cellular Signal
Strength LEDs
Blue Relative signal strength indicator (RSSI), shown as a number of LEDs.
0: signal strength unknown or unacceptable
1: signal strength low/weak
5: signal strength high/excellent
Specific dB values for the signal can be found via the web interface; go to
Administration > System Information > Mobile. Under Mobile
Connection, the signal strength is displayed in bars and dBm. Or, from
the command line. enter the display mobile command.