User`s guide

Configuration through the web interface
163
Manually configure a Digi device to connect to iDigi Manager Pro
To use iDigi Manager Pro as a device manager for your Digi device, you need to manually
configure the Digi device to connect to iDigi Manager Pro.
1 Open the web interface for the Digi device and go to
Configuration > Remote Management.
2 On the iDigi/Remote Management settings page, enter the URL of the iDigi Platform
connectivity server (for example, sd1-na.idigi.com) in the Server Address field under
Client-Initiated Management Connection. You can find this URL from the
iDigi Manager Pro user portal screen header near the top of the screen under
About > Log Off.
3 Click the check box labeled
Automatically reconnect to the server after being disconnected.
4 Click Apply.
Managing alarms through an iDigi server
All alarms can be sent to an iDigi server for display and management from that interface. See
"Alarms" on page 146.