User`s guide

Configuration through the web interface
159
Device IP address updates
Changes to the IP address for a Digi device present a challenge in server-initiated connections,
because the iDigi server needs to locate the Digi device by its new IP address. Digi devices handle
address changes by sending a device IP address update to the iDigi server. An IP address update
permits the iDigi server to connect back to the Digi device, or to dynamically update a DNS with
the IP address of the device.
Device-Initiated iDigi Connection settings
 Enable Device-Initiated iDigi Connection: Configures the connection to the
iDigi server to be initiated by the Digi device.
 iDigi Server Address: The IP address or hostname of the iDigi server.
 Automatically reconnect to iDigi after being disconnected
Reconnect after: Whether to automatically reconnect to the iDigi server after being
disconnected and waiting for the specified amount of time.
Server-Initiated iDigi Connection settings
 Enable Server-Initiated iDigi Connection: Configures the connection to the
iDigi server to be initiated by the iDigi server.
 Enable Device IP Address updates to the following server: Enables or disables a
connection to an iDigi server to inform that server of the IP address of the Digi device,
known as a device IP address update. This permits the iDigi server to connect back to
the Digi device, or to dynamically update a DNS with the IP address of the device.
 iDigi Server Address: The IP address or hostname of the iDigi server.
 Retry if the IP address update fails:
Retry after: These options specify whether another IP address update attempt should be
made after a previous attempt failed, and how often the retry attempts should occur.