User`s guide

Configuration through the web interface
136
Update XBee firmware via the web interface--all other ConnectPort X gateways
For ConnectPort X gateways that have any other XBee module type than ZB, the process for
updating firmware is as follows:
1 In the web interface, go to Configuration > XBee Network > XBee Configuration. On the
XBee Configuration page. click the Firmware Update link.
The Firmware Update page shows the type of XBee radio in the gateway and the
current firmware level.
2 Enter or browse to the file name containing the firmware update for the XBee module.
For all ConnectPort X gateways besides ZB models, the firmware files have the
extension .oem. Files ending with .zip or .ehx cannot be used on this page.
3 Click the Update button.
After the firmware is loaded successfully, the XBee module will be restarted.
Updating XBee firmware via the command line interface
The set xbee command has several options for performing XBee firmware updates. See the
set xbee command description in the Digi Connect Family Command Reference.
Additional information on XBee modules and networks
The XBee Network page in System Information
(Administration > System Information > XBee Network)
displays more detailed information about XBee network devices, including counters related to any
applications that are exercising the devices. See "Views and statistics for managing XBee
networks" on page 197.
For detailed information about XBee module settings and operation, see the Product Manual for
the XBee RF module, available from Digi’s Support site.