User`s guide

Configuration through the web interface
132
XBee ZB and Smart Energy standard networks have all node types.
Other network types have standard nodes and adapters.
ZigBee nodes use different firmware for AT and API mode.
Standard nodes support both AT and API modes.
The gateway XBee module must be ZigBee type 1 or 3, or non-ZigBee type 0.
Remote nodes may be any node type.
EXT values-File extensions
The XBee module in a Digi gateway device can be updated with .ebl or .oem files.
XBee ZB remote nodes can be updated over the air with ebl files.
X-CTU uses .hex, .ehx, .mxi, and .zip files.
X-CTU can create .oem files from .ehx files.
For example: XBP24-ZB_2164.ebl is XBee PRO ZB coordinator API firmware that can used to
update the gateway XBee module.
Extension File type
ebl XBee ZB and Smart Energy standard module firmware
oem XBee module firmware for all other XBee module types
hex Hexadecimal-encoded firmware
ehx Encrypted hexadecimal firmware
mxi XBee module parameter information
zip Archive of above files