User`s manual

87
read_reporting_configuration_response Parameters:
reporting_direction int Configuration to be read is for reports being sent from (0) or sent to (1)
the target cluster.
destination_endpoint_id int 8-bit identifier of the endpoint on which the target cluster exists.
source_endpoint_id
(optional)
int 8-bit identifier of the end
point from which the ZCL command will be sent.
destination_address MAC 64-bit extended address of the device hosting the destination end-
point.
manufacturer_code
(optional)
int If included, the 16-bit manufacturer code of th
e attributes in the record
list. Defaults to no manufacturer code.
record_list list List of records which will make up the payload of the ZCL Read Report-
ing Configuration Response Command
item - Rea
dReportingConfigurationRecord (See
“ReadReportingConfigurationRecord” on page 122)
Parameter Type Description
remote_configuration
(optional)
bool If TRUE, the configuration was read from the remote device's
so
urce_endpoint (destination_endpoint in request). If FALSE, the config-
uration was read from the local device's destination_endpoint
(
source_endpoint in request).
cluster_id int 16-bit identifier of the cluster from which the response was sent.
server_or_client int Cluster from which the response was sent is a server (0) or client (1)
clus
ter.
profile_id int 16-bit profile identifier of the endpoint from which the response was sent.
source_endpoint_id int 8-bit identifier of the endpoint from which the response was sent.
destination_endpoint_id
(optional)
int 8-bit identifier of the endpoint to which the response was sent.
source_address MAC 64-bit extended address of the device hosting the source endpoint
(
destination endpoint in request).
manufacturer_code
(optional)
int If included, the 16-bit manufacturer code o
f the attributes in the record
list.
record_list list List of records which made up the payload of the ZCL Read Reporting
Co
nfiguration Response Command.
item - Read
ReportingConfigurationResponseRecord (See
“ReadReportingConfigurationResponseRecord” on page 122)
Parameter Type Description