User`s manual

Parameter Type Description
extended_pan_id int Extended PAN ID set on the gateway.
channel_mask int 16-bit bitmask of the channels to use for joining or forming a network.
Bit
s 0 - 16 map directly to channels 0x0B - 0x1A.
join_interval int Interval between join attempt
s for router. This parameter will also set
the registry_confirmation parameter
ZDO_Device_Manager.join_interval.
78
configure_zigbee_network_response Parameters:
leave_network
Will cause a router gateway to leave the network (no effect on the coordinator). This
command takes no parameters.
leave_network_response - has no p
arameters.
get_zigbee_network_status
Gives the status of the gateway on the ZigBee network. The status is given as both a
human-readable string and an enumerated status value. This command takes no
parameters
Parameter Type Description
status int 8-bit enumerated status value. Corresponds to the Associate
In
dication response given from an XBee ATAI command. 0x00
indicates the gateway is successfully joined to a network.
status_description string Human-readable string version of the status.
extended_pan_id int, base16 64-bit operating extended PAN ID of th
e ZigBee network of the
gateway.
pan_id int 16-bit operating PAN ID of the ZigBee network of the gateway.
channel int The channel of the ZigBee network of the gateway.
addr_short MAC 16-bit network address of the XBee in the gateway
addr_extended MAC 64-bit Extended Unique Identifier
(EUI aka MAC address) of the
XBee in the gateway
configured_extended_pan_id int 64-bit configured extended PAN ID of the ZigBee network on the
gatewa
y. 0x0 has special meaning. On a coordinator, 0x0 forms
the network on any PAN ID. On a router, 0x0 will try to join any
network.
get_zigbee_network_status_response Parameters: