User`s manual

RPC_General_Interface.debug_rpc_severity 1 If a message is generated by the

firmware with severity greater

than or equal to this value, it will

be sent as an RPC response.

Default to all warnings and

errors.

RPC_Manager.max_buffer_items 250 Up to this many outgoing RPC

responses will be stored by the

gateway before the oldest

response is discarded.

RPC_Manager.pushed_file_extension xml If pushing is enabled, this string

will be used as the file extension

of the pushed file.

RPC_Manager.pushed_file_prefix RPC_Response If RPC_Manager.use_push is

TRUE, this string will be used as

the first part of filename for the

pushed file.

RPC_Manager.use_push FALSE If TRUE, RPC responses will be

automatically pushed to iDigi.

(See “Automatic Response

Pushing” on page 54.)

RPC_Manager.use_timestamps TRUE If TRUE, all RPC responses will

include a timestamp indicating

when they were generated.

Timestamps are in standard Unix

time (seconds since 1970).

ZCL_Cluster.disable_default_response TRUE If TRUE, the disable default

response bit of ZCL messages

generated by the gateway will be

set to 1. If FALSE the bit will be

set to 0.

ZDO_Device_Manager.max_sequential_TX_failures 3 If this many transmission fail-

ures to a particular device occur

in a row, that device will be

marked as inactive.

(See “Trans-

mission Retries and Device Inac-

tivity” on page 43.)

ZDO_Device_Manager.refresh_rate 120 Every this many seconds a

match descriptor broadcast is

sent.

(See “Periodic Refresh” on

page 43.)

Registry Setting Default Description