User`s manual

34
Manual Entry
a. Manually enter the CA Public Key, Implicit Cert and Private Key.
7. Write the Certificate to the serially-attached XBee by clicking Write Certificate.
8. Enter a 128-bit hex value of your choosing into the Link Key field and click Set Link
Key to write the link key to the serially-attached XBee. Alternately, you may enter
Install Code, a 48-, 64-, 96-, or 128-bit hex value (including 16-bit CRC), and click Set
Install Code to write a link key computed from the install code to the serially-attached
XBee.