User`s manual

3. Locate and select your device from the list of locally discovered devices and click the

‘OK’ button. If your device was not found in the list, check that it is turned on and con-

nected to the same local network as your PC and click the ‘Refresh’ button. Adding

your device through automatic discovery informs iDigi about the device and config-

ures that device to connect to the iDigi Connectivity server.

Note: If the device is not locally accessible or cannot be automatically discovered, you can still add it by

clicking the 'Add Manually' button and enter the MAC address found on the bottom of the device.

4. Wait a few moments and click the Refresh button to ensure that your device status is

now Connected.

5. Select your device and double-click it, or right-click and select Properties.