User`s manual

126
CancelAllLoadControlEventsRecord
Corresponds to payload of Cancel All Load Control Events in the SE Specification.
Parameter Type Description
cancel_control int Defaults to 0x1 (use randomization from original event).
ReportEventStatusRecord
Corresponds to payload of Report Event Status in the SE Specification.
Parameter Type Description
issuer_event_id int No default.
event_status int No default.
event_status_time int Defaults to current time whe
n record is cre-
ated.
criticality_level_applied int No default.
cooling_temperature_set_point_applied int Defaults to 0x8000 (denotes not used).
heating_temperature_set_point_applied int Defaults to 0x8000 (denotes not used).
average_load_adjustment_percentage_applied int Defaults to 0x80 (denotes not used).
duty_cycle_applied int Defaults to 0xFF (denotes not used).
event_control int No default.
signature_type int Defaults to 0x01 (ECDSA).
signature base16 42 bytes. Defaults to all zero.
GetScheduledEventsRecord
Corresponds to payload of Get Scheduled Events in the SE Specification.
Parameter Type Description
start_time int Defaults to zero (no st
art time filter)
number_of_events int Defaults to zero (no limit on number of events returned)