User`s manual

Parameter Type Description
source_endpoint_id
(optional)
int 8-bit identifier of the endpoint on the gateway hosting
the
DRLC server cluster. Defaults to the standard SE
endpoint (0x5E).
record LoadControlEventRecord Contains information about the event to add. (See
“LoadControlEventRecord” on page 125).
Parameter Type Description
source_endpoint_id int 8-bit identifier of the endpoint on the gateway hosting
the
DRLC server cluster.
cluster_id int 16-bit identifier of the cluste
r to which the DRLC event
was sent.
status int Indicates the local success or failure of adding the
e
vent using standard ZCL status values. Can be suc-
cess (0x00), invalid field (0x85) or duplicate exists
(0
x8A).
record LoadControlEventRecord Record containing information about the event that
was ad
ded. (See “LoadControlEventRecord” on
page 125).
device_list list List of all devices to which the event was sent. Will be
empty
if status is not success (0x00).
item - MAC
- 64-bit extended address of a
device to which the event was sent.
92
create_DRLC_event Parameters:
create_DRLC_event_response Parameters:
cancel_DRLC_event
Removes a DRLC event from the gateway’s list of events. A Cancel Load Control Event
command (0x01) will be immediately sent to all DRLC client clusters hosted on an active
device. This command will be sent from the specified endpoint hosting a DRLC server
cluster on the local device.