User`s guide

Default IP address and methods for assigning an IP address

All products that have a cellular (WAN) interface ship with static IP address for the Ethernet port

of 192.168.1.1 and DHCP server enabled by default. Therefore, simply connecting a laptop

computer to the Ethernet port of these products allows direct access to the web interface for

configuration.The Ethernet port of the laptop should be configured to automatically receive an IP

address and DNS server address.

All products that only have an Ethernet or Wi-Fi (LAN) interface ship with DHCP client enabled

by default. Accessing the web interface on these products is most easily done by connecting it to a

LAN that has a DHCP server.

To discover which IP address has been assigned to the device, use the Device Discovery Utility for

Windows, available on the Digi Support site. See installation instructions on page 52.

There are several ways to assign an IP address to a Digi device, described on the following pages:

 Use Dynamic Host Configuration Protocol (DHCP) from the web interface.

 Use the command-line interface.

 Use Automatic Private IP Addressing (APIPA), also known as Auto-IP.