User`s guide

System status LEDs
244
XBee Link Off Gateway is disabled.
Solid green XBee RF module in the gateway has started or joined an XBee network.
Blinking green XBee RF module in the gateway has not started or joined an XBee
network.
XBee Activity Off There is no XBee network activity
Blinking yellow Serial data is being sent between the XBee RF module and the gateway.
For more information on the states indicated by these LEDs, see the
description of the D5 (DIO5 Configuration) parameter in the product
manual for the XBee RF module.
Wi-Fi Link Solid yellow Wi-Fi link is up.
Wi-Fi Activity Blinking green Wi-Fi traffic is on the link.
Cellular Signal
Strength LEDs
Green Relative signal strength indicator (RSSI), shown as a number of LEDs.
0: signal strength unknown or unacceptable
1: signal strength low/weak
3: signal strength high/excellent
Specific dB values for the signal can be found via the web interface; go to
Administration > System Information > Mobile. Under Mobile
Connection, the signal strength is displayed in bars and dBm. Or, from
the command line. enter the display mobile command.
Reset button Single press: Performs equivalent of a power-cycle.
Press and hold: Resets device configuration settings to factory defaults
(factory reset).
ConnectPort X8 LEDs and buttons
LED/button Color and Light
Pattern
Description