User`s guide

Configuration through the web interface
131
X values-Network type
Y value-Node type
API mode is a frame-based interface mode that extends the level to which a host application can
interact with the networking capabilities of the module. When in API mode, all data entering and
leaving the module is contained in frames that define operations or events within the module.
Gateways typically use XBee firmware for coordinator API mode. More information about API
mode is in the Product Manuals for the XBee RF modules.
AT mode is a state in which incoming serial characters are interpreted as XBee AT commands.
More information about AT mode is in the Product Manuals for the XBee RF modules.
Network type X value
XBee 802.15.4, 868MHz, or 900MHz 1
XBee ZB 2
Smart Energy 3
DigiMesh 8
Node type Y value
Standard node, or Coordinator AT command
mode
0
Coordinator API mode 1
Router AT mode 2
Router API mode 3
Router/End Device Sensor Adapter 4
End Device Power Harvester Adapter 5
Router/End Device Analog IO Adapter 6
Router/End Device Digital IO Adapter 7
End Device AT command mode 8
End Device API mode 9
Multiple node types in a zip file x