User`s guide

Administration from the Web interface
71
Connection state Both The operating state of the cellular modem:
Initializing: Modem is being reset and configured
Registering: Modem is searching for a network
Delay before connecting: Modem is delaying after an
unsuccessful connection (Verizon only)
Connecting: Mobile data connection is being established
Connected: Mobile data connection is active
Disconnecting: Mobile data connection is ending
Disconnected: Mobile data connection has ended. See Disconnect
reason for the cause.
Disabled: Mobile data connection is not enabled by configuration
settings (not on X2e yet)
Provisioning: Modem is being provisioned with the mobile carrier
(CDMA only)
PRL update: Preferred roaming list is being updated (CDMA, not
on X2e yet)
Operator scan: Modem is searching for available mobile operators
(GSM, not on X2e yet)
No device found: Modem is not available or is malfunctioning
Connection duration Both Amount of time the current mobile data connection has been active.
The format is N days HH:MM:SS.
Connection error Both Displayed after a connection error occurs only. Indicates the reason the
previous connection attempt failed:
SIM PIN required: The SIM PIN must be entered on the Mobile
Configuration page.
SIM PIN incorrect: The SIM PIN entered does not match the
actual one for the SIM.
SIM not ready: No SIM inserted or other SIM problem.
Not registered: Modem did not register with a cellular network.
Dial failed: Error starting data connection.
Authentication failed: Incorrect login or password entered on the
Mobile Configuration page.
Connection timeout: Connection did not complete.
Device reset error: Modem could not be reset.
Device open error: Modem is malfunctioning.
Device config error: Modem could not be configured.
PPP error: Internal system error
Status field Cellular
modem
type
Description