User`s guide

Configuration from iDigi Manager Pro
62
SMS settings
There are three groups of SMS settings and tasks in the iDigi Manager Pro interface from the right-
click menu for the ConnectPort X2e ZB Cellular models:
 Properties > Advanced Configuration > Cellular SMS
 Properties > Advanced Configuration > iDigi SMS
 SMS > SMS commands | Configure
Properties > Advanced Configuration > Cellular SMS
Enabled: This setting enables or disables all SMS features on this Digi device. When this option is
enabled, the remaining SMS options may be configured. This option is disabled (off) by default.
Properties > Advanced Configuration > iDigi SMS
These settings configure the iDigi device to be managed by iDigi via Short Message Service (SMS)
messages.
 State: Enables or disables iDigi SMS support.
 Restrict Sender to only iDigi Server Phone Number: Only process inbound messages
for iDigi from the number specified in the Phone Number setting. Messages from other
phone numbers will be passed on to other SMS Services on the device.
– iDigi Server Phone Number: The phone number or short code of the iDigi platform.
For more information about the iDigi SMS Phone Number and Service ID fields, contact
your Digi sales Representative, or use the iDigi Provision command. The default value
for the phone number is 32075.
 iDigi Server Service Identifier: The Service Identifier (prefix) of iDigi. This field is an
optional setting and is used in cases where there is a shared short code in use, and an
identifier (prefix) is required to redirect a message to a specific service under that short
code. The default value is idgp.