Reference Manual
Table Of Contents
ConnectCore® 8X System-on-Module Hardware Reference Manual --
Preliminary
30
Non-wireless variants
The dedicated PCIe clock generator is not internally populated in the non-wireless variants, so to use
the PCI Express interface it must be populated externally (see the ConnectCore 8X SBC Pro reference
design).
The following control lines can also be used externally in non-wireless variants:
n PCIE_LGA_OUT_CTRL0_WAKE_B
n PCIE_LGA_OUT_CTRL0_CLKREQ_B
n PCIE_LGA_OUT_CTRL0_PERST_B
Note There are other PCIe-related pads on the ConnectCore 8X module: F7, F8, F9, G20, G21, G23,
G24. Leave these pins unconnected.
Antenna ports
The ConnectCore 8X module has two antenna ports: