Reference Manual
Table Of Contents
ConnectCore® 8X System-on-Module Hardware Reference Manual --
Preliminary
2
Revision history—90002295
Revision Date Description
1P December
2018
Initial release
2P January
2019
Added backdrive caution.
3P May 2019 Updated entire manual, including entire MCAsection, some pin data, block
diagram, and assembly information.
4P March
2020
Added North American certifications; added power consumption section;
updated frequency value, variants nformation, and some graphics; updated
MCA to trademarked name.
5P May 2020 Added operating temperature statement.
6P June 2020 Added Canada, Europe, and Japan certifications; added FCC notices; added
antenna port section.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2020 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)