Reference Manual

Regulatory information and certifications United States FCC
ConnectCore® 8X System-on-Module Hardware Reference Manual --
Preliminary
109
Antenna
type Supplier Antenna part no.
Freq.
(MHz)
Peak antenna
gain (dBi)
Directional
gain (dBi)
PCB TAOGLAS FXP522.A.07.A.001 2402~2480 3.78 (Port 1)
3.15 (Port 2)
6.79
5150~5250 4.63 (Port 1)
4.61 (Port 2)
7.64
5250~5350 4.63 (Port 1)
4.61 (Port 2)
7.64
5470~5725 4.63 (Port 1)
4.61 (Port 2)
7.64
5725~5850 4.63 (Port 1)
4.61 (Port 2)
7.64
Dipole Linx ANT-DB1-RAF-RPS 2402~2480 2.5 5.51
5150~5250 4.6 7.61
5250~5350 4.6 7.61
5470~5725 4.6 7.61
5725~5850 4.6 7.61
PCB Ethertronic 1001932 2402~2480 2.5 5.51
5150~5250 5 8.01
5250~5350 5 8.01
5470~5725 5 8.01
5725~5850 5 8.01
PCB TAOGLAS FXP831.07.0100C 2402~2480 3 6.01
5150~5250 5.5 8.51
5250~5350 5.5 8.51
5470~5725 5.5 8.51
5725~5850 5.5 8.51
Note If using the RF module in a portable application (for example - if the module is used in a hand-
held device and the antenna is less than 20 cm (8 in) from the human body when the device is in
operation): The integrator is responsible for passing additional SAR (Specific Absorption Rate) testing
based on FCC rules 2.1091 and FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields, OET Bulletin and Supplement C. The testing results will be submitted to the
FCC for approval prior to selling the integrated unit. The required SAR testing measures emissions
from the module and how they affect the person.