Reference Manual

Regulatory information and certifications United States FCC
ConnectCore® 8X System-on-Module Hardware Reference Manual --
Preliminary
106
United States FCC
The ConnectCore 8X module complies with Part 15 of the FCC rules and regulations. Compliance with
the labeling requirements, FCC notices and antenna usage guidelines is required. To fulfill FCC
Certification, the OEM must comply with the following regulations:
The system integrator must ensure that the text on top side of the module is placed on the outside of
the final product.
ConnectCore 8X module may only be used with antennas approved (see Approved antennas).
Labeling requirements
WARNING! The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the final product
enclosure that displays the contents shown below. Required FCC Label for OEM products
containing the ConnectCore 8X module.
Contains FCC ID: MCQ-CCIMX8
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Maximum power and frequency specifications (FCC)
RF
band
Peak
antenna
gain Technology Frequencies
2.4GHz 2.5 dBi BT + EDR [BW 1 MHz] x 79 non-overlapping channels, # (center freq. MHz): *
[2400 - 2483.5 MHz]: 0 (2402) to 78 (2480)
Bluetooth
LE
[BW 2 MHz] x 40 non-overlapping channels, # (center freq. MHz): *
[2400 - 2483.5 MHz]: 0 (2402) to 39 (2480)