User Manual

Configuration Examples
2-7
Configuration
set config ip=190.250.150.11
submask=255.255.255.0 realport=771 ..............(1)
set ports range=2-4 dev=rp ........................(2)
Configuration Notes
1.
The set config command configures the internet address and
mask for PortServer II’s Ethernet interface and configures the
RealPort TCP port (realport=771).
2.
The set ports command configures ports 2, 3, and 4 for
Realport. This command specifies dev=rp, which is an appropriate
device type for RealPort.
3.
If the dev=rp option is not available in your version of PortServer
II firmware, either upgrade the firmware or use dev=prn.