User`s guide

Manage Power Devices and Power Controllers
Chapter 9 Digi Remote Power Manager (Digi RPM) 95
Manage Power Devices and Power Controllers
After power devices and controllers are configured, you can manage them.
From the Web user interface, go to Management > Power. From the
command line interface, issue the “power” command.
In the Web user interface, there are two power-management actions:
Manage Power Devices and Manage Power Controllers.
Manage Power Devices
The Manage Power Devices page shows the status of outlets and allows
you to change the power-cycle action of each outlet (on, off, reboot).
To change the power-cycle action, click Power and choose the available
action. This change affects the power-cycle action for all outlets assigned
the same device name.