User`s guide

Configuration Considerations
74 Chapter 5 Configure Wireless Devices
Initial Configuration Using Ethernet
1. Connect serial cable, Ethernet cable, and power supply.
2. Insert the CD in the drive. The configuration wizard will automatically
start. Follow the steps in the wizard (either for Microsoft Windows or
Unix) to configure the device.
Or:
If you do not want to use the wizard, click Cancel and follow the
remaining procedure steps to set up the IP address and configure the
device through the web interface.
3. Select Discover Digi Device (from the CD).
4. Select the wireless device and assign the IP address.
5. Click Set IP.
6. Enter the IP address, Subnet, and Gateway mask and click OK.
7. Select the device and click Configure to launch your browser.
8. Enter the username root and password dbps and click OK.