User`s guide

System Configuration
Chapter 3 Configure Network and Serial Ports 49
PPP Settings
Under System Configuration, users can set the PPP (Point-to-Point
Protocol) options to enable or disable the dynamic IP address pool. The
dynamic IP address pool is a set of reserved IP addresses unique to the
network that are assigned to the incoming connections. Users set the first
IP address to use and the number of sequential addresses (plus one) to be
reserved for assignment.
Configure Incoming PPP Connections
1. Click PPP.
2. If you are using PPP, select Enable Dynamic IP Address Pool for
Incoming Connections.
3. Enter the first reserved IP address of the incoming connections and the
number of addresses to use and click Apply.
4. Click Incoming Connections > New Connection.
5. Enter the appropriate parameters and click Apply.
6. Click Reboot for changes to take effect.