User`s guide

Network Settings
26 Chapter 3 Configure Network and Serial Ports
4. Enter a host name for a group of network devices.
5. Enter the Base Socket. The base socket determines the network port
(socket) on this Digi terminal server that another network device (such
as another Digi terminal server or a PC) uses to communicate using the
Digi device’s serial port services. These services include Telnet, raw
TCP/UDP, and SSL.
Most applications can leave this value unchanged. To calculate these
settings:
• Telnet port = Base Socket + Serial Port Number
• Raw port = Base Socket + 100 + Serial Port Number
• SSL port = Base Socket + 600 + Serial Port Number
For example:
6. Click Apply.
7. Click Reboot for changes to take effect.
Service Base Socket Network Port
telnet 2000 2001
raw (TCP or UDP) 2000 2101
SSL 2000 2601