Specifications
Table Of Contents
- EIA-232 asynchronous interface
- Physical cable characteristics
- Grounding requirements
- Environmental requirements
- Data rate information
- Data rate vs. cable length recommendations
- Resolving transmission errors
- EIA-232: DB-25 to DB-25
- Simple Terminal/Printer Cable
- Terminal/printer cable with DTR handshaking
- Terminal/printer cable with RTS/CTS handshaking
- Terminal/printer cable for software (XON/XOFF) or hardware (DTR) handshaking
- EIA-232: RJ-45 to DB-25
- Part numbers for RJ-45 to DB-25 cable adapters:
- Part numbers for RJ-45 to DB-9 cable adapters:
- Part numbers for RJ-45 to RJ-45 8-pin crossover cable for Cisco & Sun Netra:
- Simple software handshaking terminal/printer cable (RJ-11)
- Terminal/Printer Cable with DTR Handshaking
- Terminal/printer cable with DTR handshaking
- ALTPIN terminal/printer cable for software (XON/XOFF) or hardware (RTS/CTS) handshaking
- Terminal/printer cable for software (XON/XOFF) or hardware (RTS/CTS) handshaking
- RJ-45 8-pin to modem (ALTPIN option)
- 8-Wire modem cable supporting ALTPIN option
- RJ-45 to DB-25 modem cable (10-wire)’
- RJ-45 to RJ-45 8-pin crossover cable
- Pin positions for RJ-45
- EIA-422 asynchronous interface
- Physical cable characteristics
- Interface signaling
- Grounding requirements
- EIA-485 asynchronous interface
- Physical cable characteristics
- Interface signaling
- Grounding requirements
- Termination information
- RJ-45 pinouts
- DB-9 pinouts
- RJ-45 8-pin EIA-232/ 22/ 485 PortServer TS 8/16 MEI
- DataFire® 2000 sync adapter
- Features
- Recommendations
- X.21, male DB-15 connector
- V.35, male 34-pin connector
- EIA-232 / V.28 (V.24), male DB-25 connector
- EIA-530/422, male DB-25 connector
- Pinout reference
- Asynchronous cabling
- Cable wall mount options
- Cross reference cable to order numbers and ID numbers
- EIA 232 Information
- RS-232 flow control primer
- Fiber optic cable specifications and source
- Loopback connector pinouts
- EtherLite RJ-45 to DB-25M modem adapter
- EtherLite RJ-45 to DB-25M 4-Wire duplex cable (RS-422)
- EtherLite RJ-45 to DB-25M console adapter
- EtherLite RJ-45 to DB-9F console adapter
- EtherLite and SCSI Terminal Server RJ-45 to DB-9M modem cable
- EtherLite and SCSI Terminal Server RJ-45 to DB-9F terminal emulator cable
- EtherLite and SCSI Terminal Server RJ-45 to DB-25M modem cable
- EtherLite RJ-45 8-pin to DB-25M DTE modtap adapter
- EtherLite RJ-45 8-pin to DB-25M DCE modtap adapter
- EtherLite RJ-45 to DB-9F DCE modtap adapter
- EtherLite and SCSI Terminal Server RJ-45 to RJ-45 Cisco console adapter
- EtherLite and SCSI Terminal Server RJ-45 to DB-25M terminal printer cable
- Digi One, PortServer TS, and Multi-Port Serial Cards RJ-45 to DB-9F cable adapter
- Digi One, PortServer TS, and Multi-Port Serial Cards RJ-45 to DB-25M console adapter
- Digi One, PortServer TS, and Multi-Port Serial Cards RJ-45 to DB-25F cable adapter
- Digi One, PortServer TS, and Multi-Port Serial Cards RJ-45 to DB-25M modem adapter
- Digi One, PortServer TS, and Multi-Port Serial Cards RJ-45 to DB-9M modem adapter
- Digi One, PortServer TS, and Multi-Port Serial Cards RJ-45 to DB-25M printer adapter
- Digi CM RJ-45 to DB-9F DTE RS-232 crossover cable
- Digi CM RJ-45 to DB-25M modem adapter
- Digi CM RJ-45 to DB-9F console adapter
- Digi CM RJ-45 to DB-25M console adapter
- Digi CM RJ-45 to DB-25F console adapter
- Digi CM RJ-45 to DB-9M modem adapter
- Digi CM RJ-45 to DB-25M (DCE RS 232) straight-through cable
- Digi CM EIA-232 RJ-45 to DB-25M (DTE RS 232) crossover cable
- Digi CM RJ-45 to RJ-45 Sun Netra or Cisco crossover cable
- Digi CM RJ-45 to Sun Mini Din cable
- Async conversion RJ-XX to DB-XX
- Cable vendors
- DataFire Sync 2000 SCSI pinouts
- Digi One EM DB-9 connector pinouts
- Digi One IA RealPort EIA-232 DB-9 connector pinout
- Digi One EM EIA-232 DB-9 and terminal block pinout
- Digi One SP DB-9 pinout
- Async EIA-422 DB-9 connector pinout
- Async EIA-422 DB-25 pinout
- Async RJ-45 to RJ-45 crossover cable - for cross-connecting Digi asynchronous ports together
- DB-25F to RJ-45 Cisco console cable adapter
- SCSI Terminal Server DB-25M to RJ-45 Cisco console cable adapter
- Difference between DTE and DCE
- DB-9F to RJ-45 3COM Total Control/COMPAQ Microcom modem cable
- SCSI Terminal Server DB-25M to RJ-45 3COM Total Control/COMPAQ Microcom modem cable
- DB-25F to RJ-45 3COM Total Control/COMPAQ Microcom modem cable
- RJ-45 to RJ-45 (Altpin on) 3 COM Total Control/COMPAQ Microcom modem cable
- RJ-45 10-pin to RJ-45 3 COM Total Control/Compaq Microcom modem cable
- DB-9F to DB-9M modem cable
- DB-9F to DB-25M modem cable
- DB-25F to DB-9M modem cable
- DB-25F to DB-25M modem cable
- SCSI Terminal Server DB-25M to DB-9M modem cable
- RJ-45 (Altpin on) to DB-9M modem cable
- RJ-45 (Altpin on) to DB-25M modem cable
- RJ-45 10-pin to DB-9M modem cable
- RJ-45 10-pin to DB-25M modem cable
- DB-9F to DB-9F terminal emulator cable
- DB-9F to DB-25F terminal emulator cable
- DB-25F to DB-9F terminal emulator cable
- DB-25F to DB-25F terminal emulator cable
- SCSI Terminal Server DB-25M to DB-9F terminal emulator cable
- SCSI Terminal Server DB-25M to DB-25F terminal emulator cable
- RJ-11 6-pin/4-wire to DB-9F terminal emulator cable
- RJ-11 6-pin/4-wire to DB-25F terminal emulator cable - software flow control only
- RJ-11 6-pin to DB-9F terminal emulator cable
- RJ-11 6-pin to DB-25F PC terminal emulator cable
- RJ-45 4-wire to DB-9F terminal emulator cable - software flow control only
- RJ-45 4-wire to DB-25F terminal emulator cable - software flow control only
- RJ-45 (Altpin on) to DB-9F terminal emulator cable
- RJ-45 (Altpin on) to DB-25F terminal emulator cable
- RJ-45 to DB-9F terminal emulator cable
- RJ-45 10-pin to DB-9F terminal emulator cable
- RJ-45 10-pin to DB-25F terminal emulator cable
- RJ-45 (Altpin On) to RJ-45 Cisco console adapter
- V.35 to DB-25M cabling
- V.35 pinout
- X.21 V.11 to DB-15 cable pinout
- Digi AccelePort Xp and NEO HD-68-pin Ultra SCSI connector
- Sync V.24 DB-25 connector pinout
- EIA 422 DB-25 pinouts for Sync boards
- Sync 2000 single-port V.36/EIA-449 pinout
- DB-9F to DB-9M terminal/printer cable
- DB-9F to DB-25M terminal/printer cable
- DB-25F to DB-9M terminal/printer cable
- DB-25F to DB-25M terminal/printer cable
- SCSI Terminal Server DB-25M to DB-9M terminal/printer cable
- SCSI Terminal Server DB-25M to DB-25M terminal/printer cable
- RJ-11 6-pin/4-wire to DB-9M terminal/printer cable
- RJ-11 6-pin/4-wire to DB-25M terminal/printer cable
- RJ-11 6-pin to DB-9F terminal/printer cable
- RJ-11 6-pin to DB-25M terminal/printer cable
- RJ-45 4-wire to DB-9M terminal/printer cable - software flow control only
- RJ-45 4-wire to DB-25M terminal/printer cable
- RJ-45 (Altpin on) to DB-9M terminal/printer cable
- RJ-45 to DB-25M terminal/printer cable
- RJ-45 to DB-9M terminal/printer cable
- RJ-45 10-pin to DB-9M terminal/printer cable
- RJ-45 10-pin to DB-25M terminal/printer cable
Chapter 5 EIA-232: RJ-45 to DB-25 21
RJ-45 8-pin plug hardware handshaking (DTR) cable
When an 8-pin plug is used for connections for connecting a terminal,
printer, or other DTE device configured for DTR (hardware) flow control,
the following cable wiring is often sufficient. However, some terminals and
printers may use a signal other than DTR for flow control. In addition, some
terminals and printers may have other cable requirements. Consult your
terminal or printer manual for this information. For more universal
compatibility, use the RJ-45 10-wire terminal/printer cable or a Digi RJ-45
to DB-25 adapter.
Terminal/Printer Cable with DTR Handshaking
Note: Some terminal or printer manufacturers may use different methods of flow
control. Consult your documentation for specific wiring requirements.
RJ-45
(Digi end)
DB-25 male (peripheral)
Signal Pin Pin Signal
TxD 4 connected to 3 RxD
RxD 5 connected to 2 TxD
CTS 7 connected to 20 DTR
SG 6 connected to 7 SG
GND 3 connected (via shield) to 1 (or shell) GND
jumpered 4+5 RTS+CTS